Sony Ericsson T630 Working Instructions page 13

#
17
18
19
20
21
22
3/000 21-1/FEA 209 544/84 B

SonyEricsson Mobile Communications AB
Figure
fig 2.17
fig 2.18
fig 2.19
fig 2.20
fig 2.21
fig 2.22
Working Instructions, SP/Mechanical
Instruction
Press the joystick button down
onto the square plastic pin on
the joystick switch.
Make sure the gasket (1) is left
on the button
(fig 2.17)
Pick up the keyboard with
your fingers and mount it over
the dome foil assembly.
(fig 2.18)
Extra paragraph.
(fig 2.19)
Pick up the front. Make sure
that no dust, particles or
adhesive remains on the glass.
(fig 2.20)
Place the front over the frame.
(fig 2.21)
Mount the screws, with
washers, in the order 1 to 4.
(fig 2.22)
Note
The button does not have
to be oriented in any
special direction.
Use the 2 keyboard
guiding pins below * and #
keys to mount the
keyboard in its correct
position.
If you have assembled a
new LCD display: Don`t
forget to remove the
display protection foil with
a pair of tweezers before
assembling the front (See
fig 2.20).
Very important: Check for
dust inside the phone
before assembling the
front.
Use air blow equipment
Use Torque screwdriver
torx no 6 set to 20 Ncm
Screw until the torque is
reached.
Removed screws cannot be
reused and must be
scrapped due to lock tite.
13(34)