Table of Contents
Advertisement
Section 2
REU615 overview
2.2
2.2.1
2.3
12
•
IED User Management
•
Application Configuration
•
Graphical Display Editor
Download connectivity packages from the ABB web site
www.abb.com/substationautomation
Operation functionality
Optional functions
•
Arc protection (configuration A only)
•
Modbus TCP/IP or RTU/ASCII
•
IEC 60870-5-103
•
DNP3 TCP/IP or serial
•
RTD/mA measurements and multi-purpose protection (configuration B only)
Physical hardware
The IED consists of two main parts: plug-in unit and case. The content depends on
the ordered functionality.
Table 2:
Plug-in unit and case
Main
Slot ID
Content options
Plug-in
-
HMI
unit
X100
Auxiliary power/BO
module
X110
BIO module
X120
AI/BI module
Table continues on next page
Small (4 lines, 16 characters)
Large (8 lines, 16 characters)
48-250V DC/100-240 V AC; or 24-60 V DC
2 normally-open PO contacts
1 change-over SO contacts
1 normally open SO contact
2 double-pole PO contacts with TCS
1 dedicated internal fault output contact
8 binary inputs
4 signal output contacts
Only with configuration B:
3 phase current inputs (1/5 A)
1 residual current input (1/5 A)
3 phase voltage inputs (60-210 V)
1MRS757054 A
http://
REU615
Application Manual
Advertisement
Table of Contents
