Table of Contents
Advertisement
4.5 How to set TR-151SP enter motion mode?
You could send command to ask TR-151SP to enter motion mode by SMS command media or
GPRS command media. Under motion mode, in addition to the static report interval, TR-151SP
will send out the motion report when it senses vibration. If you'd like to continually get the
location information of the vehicle installed with TR-151SP, you could make TR-151SP enter
motion mode.
?16,IMEI,Report_media,Regular_Report_Interval,Vibration_Report_interval,
Sensitivity,Motion_Return_Phone_number,Report_phone_number!
$16,IMEI,Report_media,Regular_Report_Interval,Vibration_Report_interval,
Sensitivity,Motion_Return_Phone_number,Report_phone_number!
Format
?,$
16
IMEI
Report Media
Static Report Interval
Motion Report Interval
Sensitivity
Motion_Report_Phone_Number
Return_Phone_Number
!
TR-151SP will send OK message to the return phone number when the command media is SMS
or to GPRS server when the command media is GPRS to confirm it has received the request.
If the report method is SMS:
According to the static report interval, TR-151SP will send the static report like
TR-151SP
SMS
Command Media for Motion Mode
GPRS
Command Media for Motion Mode
Description
Start sign
Function code
IMEI code of the TR-151SP
The method of sending the location information
1: SMS
2: GPRS
3: SMS & GPRS
The regular report interval of motion mode. The unit is minute. The
range is 30-1440 minute.
The report interval when TR-151SP senses vibration. The unit is
second. The range is 5-65535 second.
The number of vibration which activates TR-151SP to send motion
report. The value range is 1~255. The larger the number is, the less
sensitive the device is.
The phone number for receiving location report
The phone number for receiving OK message.
End sign
page 20
Advertisement
Table of Contents
