Advertisement
ARH
Laser safety notices
ATTENTION, LASER RADIATION – LASER CLASS 2
Never look directly into the beam!
The device fulfills the EN 60825-1:2008-05 (IEC 60825-1:2007) safety regulations for a product in laser class 2 as well as the
U.S. 21 CFR 1040.10 regulations with deviations corresponding to "Laser Notice No. 50" from June 24th, 2007.
Never look directly into the laser beam or in the direction of reflecting laser beams!
If you look into the beam path over a longer time period, there is a risk of injury to the retina.
Do not point the laser beam of the device at persons!
Intercept the laser beam with an opaque, non-reflective object if the laser beam is accidentally directed towards a person.
When mounting and aligning the device, avoid reflections of the laser beam off reflective surfaces!
CAUTION! Use of controls or adjustments or performance of procedures other than specified herein may result in hazardous light
exposure.
The use of optical instruments or devices (e.g., magnifying glasses, binoculars) with the product will increase eye hazard.
Adhere to the applicable legal and local regulations regarding protection from laser beams acc. to EN 60825 (IEC 60825) in its latest
version.
The device must not be tampered with and must not be changed in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze electronic GmbH + Co. KG.
NOTICE
Affix laser information and warning signs!
Laser information and warning signs are firmly attached to the device (see
A
B
A Laser exit opening
B Laser warning sign
C Laser information sign with laser parameters
Leuze electronic GmbH + Co. KG
info@leuze.com • www.leuze.com
C
In der Braike 1 D-73277 Owen Tel. +49 (0) 7021 573-0
Laser alignment aids
).
LASER RADIATION
DO NOT STARE INTO BEAM
Maximum Output (peak):
Pulse duration:
Wavelength:
650 nm
CLASS 2 LASER PRODUCT
EN 60825-1:2007 Complies with 21 CFR 1040.10
C
1 mW
cw
Accessories ARH ... - 06
Advertisement
