Advertisement
Dimensioned drawings
ARH 96
ARH 96
ARH 46
ARH 46
Specifications
Electrical data
Voltage supply
Ready to operate
Switching on/off
Visual range
Light wavelength
Laser class
Mechanical data
Housing
Environmental data
Ambient temp. (operation/storage)
Protection class
Standards applied
Order guide
Laser-box
Complete for 46B series
Complete for 46C series
Complete for 49C series
Complete for 96 series
Accessories ARH ... - 06
2 commercially available AAA batteries 2x1.5V replaceable
approx. 8 hours in permanent operation
by pressing the flip switch
approx. 50m depending on ambient light
650 ... 670nm (visible red light)
2 in accordance with EN 60825-1:2007
aluminium
-20°C ... +55°C/-30°C ... +70°C
IP 45
EN 60825-1, 21 CFR 1040.10
Designation
ARH 10
ARH 46
ARH 46C
ARH 49C
ARH 96
Part No.
50080537
50040739
50129659
50129660
50080502
ARH
Remarks
Mounting for
ARH 46/46C
The bracket is placed on top
of the housing (46B series/
46C series).
Mounting for
ARH 96/49C
The cover of the sensor
(96 series/49C series) has to
be open.
The ARH 96 is fastened to
the thread hole of the cover
by using the knurl screw.
Operation
After switching on through
the flip switch, a laser beam
projects a visible red light
spot which simulates the
optical axis of the transmitter
respectively the receiver.
Now, the transmitter can be
adjusted in such a way, that
the light spot hits, depending
on the application:
receiver/transmitter on the
opposing side (through-
beam photoelectric
sensors)
the reflector in the middle
(retro-reflective photo-
electric sensors)
the object to be scanned
(diffuse reflection light
scanner)
Battery change
To change the AAA cells, the
two screws M2.5 on the bot-
tom and the cover have to be
removed. Change the AAA
cells acc. to the figure, mount
the cover and fasten the
screws.
Intended use
The laser alignment aids are
aids for the optical alignment
of optical electronic sensors.
Operate in accordance with
intended use!
This product is not a safety sensor
and is not intended as personnel
protection.
The product may only be put into
operation by competent persons.
Only use the product in accor-
dance with the intended use.
2016/02
Advertisement
