Page 2
Dimensioned drawings Remarks ARH 96 ARH 96 Mounting for ARH 46/46C The bracket is placed on top of the housing (46B series/ 46C series). Mounting for ARH 96/49C The cover of the sensor (96 series/49C series) has to be open. The ARH 96 is fastened to the thread hole of the cover by using the knurl screw.
Page 3
The device must not be tampered with and must not be changed in any way. There are no user-serviceable parts inside the device. Repairs must only be performed by Leuze electronic GmbH + Co. KG. NOTICE Affix laser information and warning signs! ...