Scope Of Delivery; Controls - VOLTCRAFT IRS-350 Blackbody Operating Instructions Manual

If you have reason to believe that the device can no longer be operated safely, disconnect it immediate-
ly and make sure it is not unintentionally operated. It can be assumed that safe operation is no longer
possible if:
• the device shows visible damage,
• the device does not function any longer or
• after it has been stored under unfavourable conditions over a period of time or
• after it has been exposed to heavy stress during transport.
You should also observe the safety instructions in the individual chapters of these operating instructions
and in the operating instructions of the devices to be calibrated.

Scope of delivery

IRS-350 Blackbody
Mains cable
Operating instructions

Controls

(See illustration on the fold-out page)
1 Function displays
AT Display for factory adjustment only
OUT Heating indicator
ALM1 Excess temperature (heating element off)
ALM2 Excess temperature (increased cooling activated)
°C Display of temperature unit for Europe in degrees Celsius (°F not active)
2 Green display of setpoint temperature
3 Red display of actual temperature
4 Contact sensor opening for measuring (max. ø 3 mm)
5 Calibration area (heating element)
6 Cooling area
7 UP button to increase settings
8 DOWN button to decrease settings
9 Button for factory adjustment only (inactive)
10 SET button for input acknowledgement
11 Fan opening
12 Fuse holder for heating element fuse
13 Fuse holder for mains fuse
14 Mains connection
15 On-off switch
16