Table of Contents
Advertisement
4. Delivery contents
• Device tester GT-6000 v2
• 1 mains cable (IEC 60320 C19)
• 1 test lead with alligator clip
• 1 IEC power cable (IEC adapter cable IEC 60320 C13)
• 1 USB-C connection cable (USB-A connector to USB-C socket)
• 6 AA batteries,1.5 V (type AA/LR6)
• 1 lithium button battery (CR2032)
• 1 pouch
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the QR
code. Follow the instructions on the website.
5. Optional accessories
Passive measurement adapter:
Single and three-phase loads adapter are intended for R
, R
and I
measurements (without mains voltage-
PE
ISO
EA
dependent switching device). Commercially available measurement adapters with the following connections can be
used:
16 A CEE connector (5-pin, L1, L2, L3 are bridged) --> earthing contact connector.
Active measurement adapter:
Three-phase loads adapter for R
and IPE measurements (direct measurement, with mains voltage-dependent
PE
switching device) under operating conditions:
16 A CEE adapter (5-pin), active
The active measurement adapter can be obtained using item no. 2267357.
5
Advertisement
Table of Contents
