ProLights TRIBE VISUALGOB User Manual page 22

6
1. MOUNTING BRACKET
2. GOBO SCREW to manually change the
projected figure
3. FOCUS AND ZOOM ADJUSTING SCREW to
zoom the projected image clearly
4. IR RECEIVER for IR remote control
5. LOCKING KNOB for the mounting bracket.
6. SAFETY EYE to attach safety cable
7. CONTROL PANEL with display and 4 button
used to access the control panel functions
and manage them.
8. Universal Serial Bus (USB)
VISUALGOB
9. POWER IN mains plug for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable. The support for the mains fuse is
located near the mains plug. Only replace a
blown fuse by one of the same type.
10. POWER OUT: connect to supply power to the
next unit.
11. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
12. DMX OUT (3-pole XLR):
1= ground, 2 = DMX -, 3 = DMX +