Busch-Jaeger 6730 Manual page 71

Opera ion with a KNX bus t
system
Display of KNX telegrams
T he LEDs of the WaveLINE LED display can be used to
vi sualise telegrams from Busch Installation Bus
®
Po wernet systems. The unit is then used as a display
unit.
T he necessary unit parameters can be set with a
correspo nding ETS (ETS 2.1 or higher) or Power Project
Applicati on.
Oper ation of Busch Installation Bus
®
Po wernet
For the on-site operation of EIB / KNX and Busch
®
Po wernet flush-mounting inserts, the units are
program med as described on page 52.
Pos: 9 /F uer alle Dokumente/Seitenwechsel @ 0\mod53_1.doc @ 1171
Pos: 9 /F uer alle Dokumente/Seitenwechsel @ 0\mod53_1.doc @ 1171
flush-mounting inserts
ENG
®
or Busch
®
and Busch
71