Busch-Jaeger 6730 Manual page 64

Disconnecting/erasing
transm itte
window sensor 6720-xx).
Busch Watchdog
See also the operating instructions of the Busch
Watchdog
6 The WaveLINE transmitter and the LED display
are now disconnected.
7 After a successful disconnection, the indicator
LED starts to flash again. If the disconnection
fails (the indicator LED lights permanently),
repeat the process.
8 Erasing other transmitters: Confirm the selection
by briefly actuating the rocker switch. The LED
changes from flashing to continuous light.
Program the WaveLINE transmitter as described
under 4.
9 Returning to the operating mode (no erasing of
other WaveLINE transmitters): Set the selector
switch of the LED display to "S".
rs
®
WaveLine.
®
WaveLINE:
ENG 64