Busch-Jaeger 6730 Manual page 55

Disconnecting/erasing
transmitters
28 Disconnecting/erasing transmitters
Disconnect/erase WaveLINE transmitters from the
indicator LEDs.
Erasin g individual transmitters
1 Set the selector switch of the LED display (unit
back) to "E".
2 After the installation on the flush-mounting ins
all of the LEDs light up green for 3 seconds. Afte
that, the LEDs flash red.
3 Briefly actuate the rocker switch in order to select
the indicator LED from which you would like to
disconnect a transmitter.
Every actuation of the rocker switch selects
another indicator LED and the indicator status
changes from flashing to continuous light.
4 Perform the programming of the WaveLINE
transmitter.
WaveLINE window sensor: Insert the battery
(see also the operating instructions of the
ENG 55
ert,
r