Busch-Jaeger 6730 Manual page 56

Disconnecting/erasing
transmitters
window sensor 6720-xx).
Busch Watchdog
See also the operating instructions of the Bus
Watchdog
5 The transmitter and the radio LED display are
disconnected.
6 After a successful disconnection, the indicator
LED starts to flash red again. If the programming
fails (the indicator LED lights permanently),
repeat the process.
7 Returning to the operating mode:
Set the selector switch of the LED display to
Disconn ect/erase WaveLINE
indicator LEDs.
Erasing all the transmitters of an indicator LED
1 Set the selector switch of the WaveLINE LED
display (unit back) to "EA".
2 After the installation on the flush-mounting insert,
®
6745 AGM WaveLINE:
®
WaveLine.
transmitters from the
ENG
"S".
56
ch