Busch-Jaeger 6730 Manual page 58

Disconnecting/erasing
transmitters
3 Briefly actuate the rocker switch in order to select
the indicator LED from which you would like to
disconnect all of the tr
Every actuation of the rocker switch selects
another indicator LED and the indicator status
changes from flashing to continuous light.
4 Press the operating rocker switch (top or bottom)
for more than 3 seconds. If the top and the
bottom are pressed simultaneously, the functi
will not be executed.
5 All the transmitters are disconnected from the
indicator LED.
6 After a successful disconnection, the indicator
LED starts to flash red again. If the disconnection
fails (the indicator LED lights permanently),
repeat the process.
7 Returning to the operating mode:
Set the selector switch of the WaveLINE LED
display to "S".
ENG
ansmitters.
58
on