Busch-Jaeger 6730 Manual page 70

Opera ion with a KNX bus t
system
32 Operation with a KN X bus system
Operation of the WaveLINE LED display with Busch
Installati on Bus
Tr ansmission of WaveLINE radio telegrams on
KNX bus s
The WaveLINE LED display can be used to transmit
Wa veLINE radio telegrams coming, for example, from a
Busch W atchdog
sensor o n an existing Busch Installation Bus
Busch P owernet
displa yed, for example, on a control panel.
For this purpose, the WaveLINE transmitters must be
program med for the WaveLINE LED display (as described
on pag e 52). The necessary unit parameters can be set
wit h a corresponding ETS (ETS 2.1 or higher) or Power
Project A pplication.
®
/ Busch Powernet
ystems
®
WaveLINE or from a WaveLINE windo
®
System. The signals can then be
ENG
®
flush-mounting inserts
®
or on a
70
w