Busch-Jaeger 6730 Manual page 52

Programming transmitters
27 Programming transmitters
Programming WaveLINE transmitters for the
indicator LEDs
Up to eight WaveLINE tra
assigned to each of the indic
1 Set the selector switch of the LED display (unit
back) to "P".
2 After the installation on the flush-mounting insert,
all of the LEDs light up green for 3 seconds. After
that, the LEDs flash green.
3 Briefly actuate the rocker s
the indicator LED to be programmed.
Every actuation of the rocker switch selects
another indicator LED and the indicator status
changes from flashing to continuous light.
If no other in
minutes, the WaveLINE LED display returns t
the state that is described under 1.
dicator LED is selected within 10
ENG
nsmitters can be
ator LEDs.
witch in order to select
52
o