Busch-Jaeger 6730 Manual page 54

Programming transmitters
6 Programming other transmitters for an indicator
LED: Select the desired indicator LED by briefly
pressing the rocker switch and program the
transmitter (see under 3).
If the entire memory space of the display
is occupied, the display LED will flash red
after the programming. You must erase some
of the transmitters before you can program
any other WaveLINE transmitters.
7 Returning to the operating mode (no
programming of other WaveLINE transmitters):
Set the selector switch of the LED display to "S
ENG
LED
54
".