Busch-Jaeger 6730 Manual page 60

Programming transmitters
29 Programming transmitters
Programming a transmitter for the flush-mounting
insert
Up to eight WaveLI
assigned to each of the flush-mounting inserts. I
WaveLINE radio telegrams are received, the
telegram transmitted last will be executed.
1 Set the selector switch of the LED display (unit
back) to "P".
2 After the installation on the flush-mounting ins
all of the LEDs light up green for 3 second
that, the LEDs flash green.
3 Press the complete rocker switch of the LED
display (top and bottom) for more than 5
seconds. After 5 seconds, the first LED lights up
green. All other LEDs are off.
4 Confirm the selection by briefly actuating the
rocker switch. The LED changes from flashing to
continuous light.
NE transmitters can be
ENG
s. After
60
f
ert,