Advertisement
• Pair and connect the D750 to your device prior to placing the scanner
in Auto Mode. The Scanner is not discoverable when in Auto Mode and
in the Stand. This facilitates a fast connection to the current connected
device when powered on (for example the start of the new business
day).
• The Trigger button must be pressed to disable Presentation Mode (and
enable Mobile Mode) after the scanner is removed from the Stand.
• The Scanner will not turn off when it's in Presentation Mode and in the
Stand under AC Power.
• To avoid excessive power drain, the scanner should not be left out of
the Stand in Auto Mode. Either press the Trigger button or Power off
the scanner.
6. BEEP and Vibration Settings
For full instructions visit:
https://socketwebcdn.blob.core.windows.net/cdn/docs/default-source/700-
series/durascan/ug_d750.pdf?sfvrsn=c1a183cb_9
page 4 of 6
Advertisement
