Advertisement
HID MODE Keyboard Pop-up
Enable
The scanner emulates the keyboard
in HID mode. So scanned barcode
data will be input into the text field.
The following steps show how to
access the onscreen keyboard while
connected to the scanner in HID
mode.
(Best used for Windows & Android)
1. Make sure the scanner is
connected to your Apple device
in HID mode.
2. Open your application and place
the cursor where you want to
enter data.
3. Quickly double press the power
button of the Scanner (like
double-clicking a mouse) to
open or close the onscreen
keyboard. The scanner will beep
once as confirmation.
iOS MODE - SCANNER-ENABLED
APP
If you are using the scanner with an
iOS device and a Scanner-enabled
Application that does not provide
instructions to connect with the
scanner, please use the following
steps.
1. Power on the scanner and scan
this barcode. The scanner will
beep 3 times.
2. Turn Bluetooth on for the Apple
device. Go to Settings >
Bluetooth. A Bluetooth Devices
search will begin.
3. Tap Socket Mobile
D750[xxxxxx] in the list of
Devices found. After a few
seconds the "Not Paired" status
will change to "Connected" and
the scanner Blue LED will blink
every 3 seconds confirming the
connection.
page 5 of 6
Advertisement
