Advertisement
3. Pair the Scanner with the Apple device:
- Power on the Scanner
- Make sure the scanner is set to HID Keyboard mode (default). If
needed you can switch to iOS Mode (explained on page 3).
- Enable Bluetooth on the Apple device. Search for Bluetooth devices
- In the list of found devices, select Socket CHS [xxxxxx]. If prompted,
tap Pair.
4. Unpairing the scanner from your iPad or iPhone
Power on the scanner. Press and hold the TRIGGER
and the POWER button together. After you hear 3
beeps, release both buttons. The scanner will unpair
and power off.
5. Mounting the Scanner with the QX Stand
When charging the scanner, make sure the
charging pins on the stand and the scanner
make contact with each other and the red LED
on the stand is illuminated. When fastened on
the magnet, the Scanner will enable the sensor
to automatically react to motion and scan any
item.
page 2 of 6
Advertisement
