Syn248 Installation and Configuration Guide
Overhead Paging
The Overhead Paging Configuration page does not appear if there are no
SB35025 Desksets connected to the system.
To set up external overhead paging:
1. In the navigation menu at left, click Overhead Paging. The Overhead Paging
Configuration page appears.
2. Enable or Disable the overhead Paging. When overhead paging is enabled,
"Overhead Page" appears as an available Paging Zone member on the Create/Edit
Paging Zone WebUI page. See
page 52
3. Select the AUX I/O Port, which is the extension number of the SB35025 Deskset to
which the overhead paging system is connected. All SB35025 Desksets installed in
the Syn248 system appear in the list.
4. Click
without saving the changes.
System Configuration
"Creating a Paging Zone with Overhead Paging" on
and
"Creating, Editing and Deleting Paging Zones" on page
to save these settings or click
51
Back to Contents
55.
to return to the previous page