Table of Contents
Advertisement
Installation
At End-of-Run
Refrigerator or Freezer
Frameless
Side panels, 1/2" minimum thickness are required
Cabinets
when using frameless cabinets. The side panel
acts as a spacer between the cabinet and the
case trim and prevents interference with cabinet
door swing. The leading (front) edge must be
finished to match surrounding cabinetry.
Product
ZIRS36N RH, Refrigerator
Dimensions
ZIFS36N RH, Freezer
Handle on the left side, the door swings left to right.
ZIRS36N LH, Refrigerator
ZIFS36N LH, Freezer
Handle on the right side, the door swings right to left.
Finished Dim.
Roughed-In Dim.
Refrigerator and Freezer
installed side-by-side
CAUTION
Refrigerators are much heavier at the top than at
the bottom – be extra careful when moving.
PRUDENCE
Les réfrigérateurs sont beaucoup plus lourds en
haut qu'en bas. Il faut être prudent lors des
déplacements.
Design Information
1/2" Thick
Side Panels
36"
37"
1/2" Thick
Side Panels
Finished Dim.
72"
Rough-In Dim.
73"
1/2" To 3/4" Side Panels. Leading
Edge Flush With Cabinet
73-1/2"
36" Stainless Steel Refrigerators, Freezers
Refrigerator
Cabinet
Refrigerator door
Cabinet
Note: 1/2" thick side panels shown.
Side panels can be any thickness.
Add side panel thickness to outside
trim width, (36" or 72" for two
models) to calculate the rough-in
dimension. The leading (front) edge
must be finished to match
surrounding cabinetry.
Refrigerator
Cabinet
Refrigerator door
10-3/4" Max.
35" Case
10" Min.
24-3/4"
36" Overall
26-3/4"
4"
84-1/2" Max.
83-1/2" Min.
5
Advertisement
Table of Contents
