GE ZIRS36N LH Installation Instructions Manual page 18

Step 7
Install
Grille Base
Cover
• Open doors fully.
• Install the double width grille base cover by slipping
• Place wire fence over the grill base cover (textured
Step 8
Remove
Grille Frame
• Back out 2 screws on each side of the top case trim.
• The top piece is secured to the unit with a rubber dust
• Slide assembly out of the rubber gasket.
18
Unified Base Cover
the notched ends over the hinges.
Install
3 Screws
side out). Drive original wire fence screws through
the fence, the grille base cover and into the frame.
Remove
Screws
gasket. Roll the trim upwards to access and remove
end screws as shown. Remove and discard inside
pieces.
ZUGSS Trim Kit
Unified Stainless Steel Grille Panel
Install
3 Screws
Remove
Screws
Dust
Gasket
Place
Trim Over
Hinges
Remove
Screws