Planning Information; Product Dimensions And Clearances; The Installation Space - GE Drawer Freezer Refrigerator Installation Instructions Manual

Stainless steel free-standing, drawer freezer refrigerator
Table of Contents

Advertisement

PRODUCT DIMENSIONS AND CLEARANCES

These Monogram free-standing refrigerators require the
following clearances for proper air circulation, plumbing
and electrical connections.
Air Circulation Clearances:
• 1/8" on each side
• 1/2" at the back side

THE INSTALLATION SPACE

The opening width must be at least 36".
36" min.
Electrical
Area
70" min.
Water Supply

Planning Information

35-7/8"
Case Width
69-5/8"
Depth Including Handles
29-1/2" - Tubular Handles
30-1/4" - Professional Handles
Installation in a corner:
• Allow 4" clearance on each side to an adjacent wall for a
• Allow 15" clearance to wall on each side for removal
Water And Electrical Locations
The opening must be prepared with the electrical and water
supply located as shown.
Additional Specifications
• A 115 volt 60Hz., 15 or 20 amp power supply is required.
Wall View
NOTE: GFI (ground fault interrupter) is not recommended.
• The cold water line can enter the opening through the floor
3
27-1/2"
Depth
35-7/8"
90° opening and access to drawers.
of drawers.
An individual properly grounded branch circuit or circuit
breaker is recommended. Install a properly grounded
3-prong electrical receptacle recessed into the back wall.
or through an adjacent cabinet, as close to the back
wall as possible. The water line should be GE
SmartConnect
Refrigerator Tubing or 1/4" O.D. copper
tubing between the cold water line and water connection
location at the rear of the refrigerator. Installation of an
easily accessible shut off valve in the water line is
recommended.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents