GE Monogram ZIR360NX Dimensions And Installation Information

ZIR360NX
GE Monogram
Dimensions and Installation Information
35"
25-3/8" Framed Models
Case Width
Case Depth
*84" From
*83-1/2"
Floor to
at
Top Frame
Rear
36" Frame to
Frame Width
Depth Including Handles:
26-7/8" Framed Models
*Shipping height. The refrigerator can be adjusted to fit
into a cutout 83-1/2" min. to 84-1/2" max. height. Note: the
top case trim at the front is 1/2" higher and will overlap
upper cabinetry or soffit. Use leveling legs and wheels for a
maximum 1" height adjustment.

Product Clearances

These units are equipped with a 2-position door stop. The fac-
tory set 130˚ door swing can be adjusted to 90˚ if clearance
to adjacent cabinets or walls is restricted. Order WX14X99
door stop for precise settings between 90˚and 130˚.
25"
Minimum
to Wall
130ϒ Door Swing
Allow 25" minimum clearance for a full 130˚ door swing.
251Dia59
Allow 15" for pan removal. for a 90˚ door swing, allow 4"
minimum clearance for professional models. If the 90˚
doorstop position is used, pan access is maintained but
pan removal is restricted.
For answers to your Monogram,
®
or GE appliance questions, visit our website
at ge.com or call GE Answer Center
800.626.2000.
®
36" Built-In Custom All-Refrigerator
90ϒ Door Swing
251Dia60
® ™
GE Profile
®
service,
ZIR360NXRH, Refrigerator
Handle on the left side, the door swings left to right.
ZIR360NXLH, Refrigerator
Handle on the right side, the door swings right to left.
These units are top-heavy and must be secured to prevent the
possibility of tipping forward. Anti-Tip protection is required.
23-7/8"
Behind Frame
The water and electrical supply must be located as shown.
36-3/4"
The finished cutout width must be 35-1/2".
Note: The case trim overlaps cabinets at the top and
sides. Frameless cabinets may require filler strips to
4" Min.
prevent interference with cabinet door swing. The opening
to Wall
width must allow for filler strips.
Caution
Specification Created 6/08
Listed by
Underwriters
Laboratories
110161