Sub-Zero 700 Service Manual page 9

Hide thumbs Also See for 700:

INTEGRA

Upper Evaporator Cover / Air Duct Removal

(All Models)

The bottom of the upper evaporator cover sets into a

channel at the bottom of the upper compartment. At

the top, screws hold the evaporator cover to the evapo-

rator fan shroud.

To remove the evaporator cover, the light diffuser must

first be removed, then

(See Figure 7-16):

1. Extract screws at top of evaporator cover.

2. Tilt cover forward and lift out of unit.

Upper Evaporator Fan Shroud Assembly Removal

(All Models)

The evaporator fan shroud assembly, which holds the

upper compartment lighting components, is secured to

the ceiling with screws.

To remove the evaporator fan shroud assembly, first

remove the light diffuser and evaporator cover, then

(See Figure 7-17):

1. Extract the mounting screws which secure fan

shroud assembly to ceiling of compartment.

2. Lower the assembly and disconnect wire harness.

TED

(736 T

all SWS #2970000)

7-9

SERIES

Screws

Figure 7-16. Upper Evaporator Cover Removal

Disconnect Wiring

Figure 7-17. Upper Evaporator Fan Shroud Assy

#7015817 - Revision A - January, 2010

Component Removal

Table of Contents