FLIR FC Series Installation Manual page 68

Hide thumbs Also See for FC Series:

Advanced Configuration

Note

It is also possible to download a camera's configuration files using the following HTTP URL:

http://<ip>/configFilesGet.php, where <ip> is the camera's IP address.

You can manually test the URL or download the files by typing the URL in a web browser.

For security reasons, you cannot download the keys.ini file. The download consists of all other

configuration files.

In the Ethernet Loopback Reset section, selecting No disables the capability to restore the camera's

Factory Defaults (including its IP address and settings, user passwords, and configuration file) by

temporarily connecting a loopback device to the Ethernet port during initial power-up. The default

setting is Yes. For more information, see

Use the Log page to set logging parameters. Scroll down and select the Download button under

Field Support Log to download a zip file to the computer for field service evaluation.

427-0089-00-12 Version 160

Restoring the Factory Settings, pg.

March 2019

This document does not contain any export-controlled information.

70.

Fc o series Fc id series Fc-690 Fc-669 Fc-644 Fc-632 ... Show all