FLIR FC Series Installation Manual page 10

Camera Installation
If using two 1/4-20 fasteners in the center of base, the maximum depth of the fastener should not
exceed 12.5 mm (0.5 in). If using four M5 x 0.8 fasteners, the maximum depth of the fastener should
not exceed 10.0 mm (0.4 in).
Figure 1-1: FC-Series Camera Bottom Mounting Holes
Figure 1-2: Top Mounting Holes
If using two 1/4-20 fasteners in the center of top, the maximum depth of the fastener should not
exceed 12.5 mm (0.5 in). If the camera is mounted using the top of the camera, the sunshield must
be removed.
427-0089-00-12 Version 160 March 2019 10
This document does not contain any export-controlled information.