FLIR FC Series Installation Manual page 23

Basic Operation and Configuration
Step 3 From the PC connected to the camera network, use the DNA utility to discover and display
the camera's current IP address.
a Download the DNA utility.
b Unzip the utility, then double-click to run the executable file (
the VLAN are discovered.
c For additional instructions on using DNA, refer to the DNA User's Manual available in the
Help ( ) link while the software is running.
Click to sort
Right-click on the camera, select Assign
Step 4
IP to change the IP address or select
between static IP or DHCP addressing.
Step 5 Double-click the camera in DNA's
Discovery List to open the camera's web
server Login page in a web browser, or
point a web browser to the camera's IP
address.
Step 6 Enter the default user name (admin) and
password (admin) to open the Live Video
page. Refer to
2.3.1 Log in to the Camera Web Page
With a web browser, log in to the camera using one of three User Names: user, expert, and admin.
By default, the passwords are: user, expert, and admin, respectively.
To prevent unauthorized access, change all of the login passwords (admin login required). For
information on how to change the passwords, refer to
Open a web browser — Google Chrome, Mozilla Firefox, Microsoft Internet Explorer 11, or Microsoft
Edge — and enter the camera's IP address. The login screen with a picture of the camera will
427-0089-00-12 Version 160
Live Video Page, pg. 24.
Important Note
March 2019
This document does not contain any export-controlled information.
DNA.exe). All the units on
Select IP Setup
Basic Camera Configuration, pg.
Online manual
Select a filter
Right-click
27.
23