FLIR FC Series Installation Manual page 43

Advanced Configuration
3.1.1 Temperature Page
The Temperature Info page displays temperature readings from the camera and GPIO signal status.
Thermo Summary
Select the temperature units to display: Kelvin, degree Celsius, or degree Fahrenheit.
Table 3-1: Temperature Labels
Thermo_Remote Heater temperature
Combined_Thermo Calculated window target temperature
Thermo_FPA Tau IR core Focal Plane Array temperature
Thermo_Housing Tau IR core housing
Thermo_Local FC-Series camera circuit board
Heater/Fan Summary
The GPIO signal status is shown.
Alarm Output
User GPIO signals are enabled by default.
(Refer to
Alarm Input
Heater Internal heater output signal
Defog
Internal heater input signal—when 0, heater power is limited
a. For example, when the camera is powered by the lower power IEEE 802.3af-2003 PoE standard. Re-
fer to PoE+ Power Supplies, pg.
427-0089-00-12 Version 160
Table 3-2: GPIO Labels
General Purpose Input/Output (GPIO), pg.
7.
March 2019
This document does not contain any export-controlled information.
6.)
a
43