FLIR FC Series Installation Manual page 31

Basic Operation and Configuration
If the Custom mode is selected, a pop-up window allows the information to be entered manually.
Note
The Nexus server must be stopped before making changes to the date and time settings.
Set the date and time parameters, then select the Save button at the bottom of the page. After
Server Status, pg. 35.
saving the settings, reboot the system. Refer to
Msg Systems: Use the Msg Systems page to setup a connection to a mail server to send outgoing
email notifications.
If the email server is on a different network, ensure the IP default gateway and DNS servers are
LAN Settings, pg. 28. Configure the Msg Systems page with
configured in the LAN Settings; refer to
mail server information and then click Save.
427-0089-00-12 Version 160 March 2019 31
This document does not contain any export-controlled information.