Sun Oracle Netra SPARC T5-1B Installation Manual page 43

Installing the OS
Perform the set of tasks that apply to your situation.
Description
Configure the preinstalled OS.
Install a new OS (Oracle ILOM web
interface).
Install a new OS (Oracle ILOM CLI).
Related Information
"Installation Task Overview" on page 1
■
▼ Configure the Preinstalled OS
This procedure assumes that you are using the Oracle Solaris OS software that was
preinstalled on the drive in slot 0 of the server module. If you are installing the
Oracle Solaris OS another way, complete the Oracle Solaris OS installation then
resume this procedure.
●
Respond to configuration questions in the Oracle Solaris installation process.
See the configuration choices in
page 37.
Related Information
"Oracle Solaris Configuration Parameters" on page 37
■
"Assign a Static IP Address to the SP" on page 44
■
Oracle Solaris Configuration Parameters
You are prompted to provide these parameters when configuring the Oracle Solaris
OS on the server module. You need to collect only the information that applies to
your installation environment.
Links
"Configure the Preinstalled OS" on page 37
"Oracle Solaris Configuration Parameters" on
page 37
"Reach a State to Install a Fresh OS (Oracle
ILOM Web Interface)" on page 40
"Reach a State to Install a Fresh OS (Oracle
ILOM CLI)" on page 43
"Oracle Solaris Configuration Parameters" on
Powering On the Server Module for the First Time 37