Sun Oracle Netra SPARC T5-1B Installation Manual page 36

9. In the left navigation panel, click on Remote Control > Redirection.
10. Select Use serial redirection, and click Launch Remote Console.
As the host boots, messages are displayed in the serial console. You are
automatically prompted for Oracle Solaris OS configuration information.
11. Configure the Oracle Solaris OS to meet your needs.
See
Related Information
"Plan Communication With the Server Module During Installation" on page 15
■
▼ Power On the Host Through the CMM (CLI)
You connect to the CMM through the RJ-45 NET MGT 0 Ethernet port. While this
Ethernet connection supports both the CLI and the web interface to the CMM SP, this
procedure describes how to use the CMM CLI.
1. Ascertain the IP addresses for the CMM.
2. Ensure that the CMM is connected to the network you are on.
The network connection is through the RJ-45 connector labeled NET MGT 0 on the
CMM.
3. Log in to the CMM with the SSH client.
$ ssh root@cmm_ip_address
Replace cmm_ip_address with the IP address of the CMM.
4. Type your password for the CMM Oracle ILOM root account when prompted.
The factory default Oracle ILOM root password is changeme, but might have
been changed in your environment.
30 Netra SPARC T5-1B Server Module Installation Guide • October 2013
"Installing the OS" on page 37.