Sun Oracle Netra SPARC T5-1B Installation Manual page 34

Powering On the Host for the First Time
Based on the connection method you selected from
Server Module During Installation" on page
row of this table.
Description
Method 1 (web interface) –
Through a browser that is on the same network as the
CMM, power on the host using the CMM Oracle ILOM
web interface.
Method 1 (CLI) –
Through a terminal window on a system that is on the
same network as the CMM, power on the host using
the CMM Oracle ILOM CLI.
Method 2 (CLI) –
Through a terminal device connected to the front panel
of the server module (using the dongle cable), power
on the host using the server module SP Oracle ILOM
CLI.
Method 3 (CLI) –
Through a terminal device connected to the CMM SER
MGT port, power on the host using the CMM Oracle
ILOM CLI.
Related Information
"Plan Communication With the Server Module During Installation" on page 15
■
▼ Power On the Host Through the CMM (Web
Interface)
You connect to the CMM through your network that is connected to the CMM NET
MGT Ethernet port. While this Ethernet connection supports both the Oracle ILOM
CLI and the web interface, this procedure uses the web interface.
This procedure assumes that the CMM Oracle ILOM is running version 3.1 or higher.
28 Netra SPARC T5-1B Server Module Installation Guide • October 2013
"Plan Communication With the
15, perform the tasks in the applicable
Links
"Power On the Host Through the CMM (Web
Interface)" on page 28
"Power On the Host Through the CMM (CLI)" on
page 30
"Power On the Host Through the Front Panel (CLI)"
on page 32
"Power On the Host Through the CMM SER MGT Port
(CLI)" on page 34