Before The First Use; Check Oil Level Resp. Fill In Oil - Westfalia T82004 Instruction Manual

Before first Use
Take the trolley jack out of the packaging and check for any damage in transit.
Dispose off packaging materials or store it out of reach of children.

Check Oil Level resp. Fill in Oil

1. Place the trolley jack on an even ground.
2. Insert the pumping handle (1) on the release valve (7). The open end of the
pumping handle fits on the square bar of the release valve.
3. Turn the release valve (7) slowly counter
clockwise. Place a cloth (cleaning cloth)
under the release valve in order to absorb
leaking oil and to avoid soiling the ground.
4. If the release
unscrewed, remove it. If oil drops out
resp. if the oil is up to the release valve
hole, the oil filling is enough.
If not, place a cleaning cloth under the
release valve and remove the cover plate
of the hydraulic cylinder (3) by using a big
screwdriver with dull end. The cover plate
is fastened with four pins on the housing.
5. Carefully prise the oil filling plug (A) out by
using a dull screwdriver. Do not use spiky
or sharp objects in order no to damage the
oil filling plug (A). Fill in high-quality
hydraulic oil until the oil appears in the
release valve opening. (7). Never fill in
brake fluid, motor oil, lube oil etc.
6. Screw the release valve lightly back and insert the oil filling plug (A) into
place. Move the handle socket (2) with the pumping handle (1) up and down
for several times in order to lubricate the internal mechanism of the hydraulic.
Place the cover of the hydraulic cylinder (3) in place. If necessary, bleed the
trolley jack.
Using
valve is completely
14
A
6,4 mm