Before First Use; Check Oil Level Resp. Fill In Oil - Westfalia 79 23 25 Instruction Manual

Before first Use

Take the floor jack out of the packaging and check for any damage in transit.
Dispose off packaging materials or store it out of reach of children.

Check Oil Level resp. Fill in Oil

1. Place the floor jack on an even ground.
2. Insert the pumping handle (1) on the release valve (7). The open end of the
pumping handle fits on the square bar of the release valve.
3. Turn the release valve (7) slowly counter clockwise. Place a cloth (cleaning
cloth) under the release valve in order to absorb leaking oil and to avoid soiling
the ground.
4. If the release valve is completely unscrewed, remove
it. If oil drops out resp. if the oil is up to the release
valve hole, the oil filling is enough.
If not, place a cleaning cloth under the release valve
and remove the cover plate of the hydraulic cylinder
(3) by using a big screwdriver with dull end. The cov-
er plate is fastened with four pins on the
housing.
5. Carefully prise the filling plug (A) out by
using a dull screwdriver. Do not use spiky
or sharp objects in order no to damage the
filling plug (A). Fill in high-quality hydraulic
oil until the oil appears in the release valve
opening. (7). Never fill in brake fluid, motor
oil, lube oil etc.
6. Screw the release valve lightly back and insert the filling plug (A) into place.
Move the handle socket (2) with the pumping handle (1) up and down for sev-
eral times in order to lubricate the internal mechanism of the hydraulic. Place
the cover of the hydraulic cylinder (3) in place. If necessary, bleed the floor
jack.
Using
16
A
6,4 mm