Table of Contents
Advertisement
6.1 THE CONTROL PANEL (Cont.)
The MOVE screen
The MOVE screen allows you to the
TOOL carriage and Feed the media feed
rollers backwards or forwards on your
Intec ColorCut LC600 cutter.
It is typically not required to use this
feature UNLESS, you wish to manually
load some media from the front and cut
a manual job without any registration
marks. You can use this screen to
manually define the cut origin.
B
Press the MOVE TAB, to select the
menu screen. The MOVE TAB changes
color to a solid purple color, to show you
have selected that option.
In the MOVE mode, the cutter status changes to [OFF Line]
receive new cutting files. When you have loading/ejecting media or moving the media/
tool carriage press the
and change the LC600 cutter status back, to ONLINE.
When the main 'MOVE' screen is displayed, press the
E
on the key pad to 'REVERSE' the media feed rollers.
sheet of media from the FRONT of the cutter. Press the
H
to advance any media loaded further forwards.
Pressing the
LEFT
right across the media.
NOTE: The origin will be 2mm above the tip of the blade in the tool holder.
When you have placed the cutting tool where you want the cutting to commence press
the [
ORIGIN ] button on the LCD panel.
Then press the
ORIGN selection. You can now press the
to the HOME screen.
Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 40
②
①
D
[ ON-LINE ]
G
or RIGHT
arrow keys
F
ENTER
key twice (2x) symbol next to it, this confirms your
③
ON LINE
/OFF LINE
⑥
⑦
Key to return the cutter to the HOME screen,
(BACKWARDs) arrow button
You can use this to load a
(FORWARDs) arrow button
I
to move the tool carriage left or
D
[ ON-LINE ]
⑨
④
⑤
ENTER
⑧
C
and will no longer
Key to return the cutter
Advertisement
Table of Contents
