Configuring Windows Wi-Fi Direct Access Point - Intec ColorCut LC600 Series Installation Manual

Configuring Windows Wi-Fi Direct Access Point.

4
. The first time you launch Wi-Fi Direct Access Point, you will need to set the
Access Point Name (SSID) and the Security Key/Password to match the SSID
and Password that your
ColorCut LC600 will try
to connect to.
Click on the Access
Point Name SSID
and set it to 'H3' .
Click on the Access
Point Security Key and
set the password to
D
'12345678'
5
. Having entered the
Access Point Name, and
the Password ensure
that is starts each time
with the same settings
by clicking the check
box next to "Start
Access Point with latest
settings on app startup"
E
. Click on the button
'START ACCESS
POINT' to configure
the PC to accept Direct
Wi-Fi connections.
6
. After clicking 'START
ACCESS POINT', the
LC600 will take approx
30 secs to 2mins to see
the Wi-Fi access point
and conenct. When the
LC600 connects, you
will see the device and
IP address appear in the
F
left column,
You can now skip to the section on Installing ColorCut Pro and setting up your LC600
for initial use and daily operation.
Intec Printing Solutions - Manual for ColorCut LC600 Sheet fed Label Cutter ........................................................................ Page No: 22
C
C
F
D
E