Hitachi SJ100 Series Instruction Manual page 96

3–30
"C" Group: Intelligent Terminal Functions
Summary Table - this table shows all nineteen intelligent input functions at a glance.
Detailed descriptions of these functions, related parameters and settings, and example
wiring diagrams are in Chapter 4, starting on page 4–6.
Option Terminal
Code Symbol
00 FW
01 RV
02 CF1
03 CF2
04 CF3
05 CF4
06 JG
07 DB
08 SET
09 2CH
11 FRS
Input Function Summary Table
Function Name
Forward Run/Stop ON
OFF
Reverse Run/Stop ON
OFF
Multi-speed select, ON
Bit 0 (LSB)
OFF
Multi-speed select, ON
Bit 1
OFF
Multi-speed select, ON
Bit 2
OFF
Multi-speed select, ON
Bit 3 (MSB)
OFF
Jogging ON
OFF
External DC Braking ON
OFF
Set Second Motor ON
OFF
2-stage Acceleration ON
and Deceleration
OFF
Free-run Stop ON
OFF
Description
Inverter is in Run Mode, motor runs forward
Inverter is in Stop Mode, motor stops
Inverter is in Run Mode, motor runs reverse
Inverter is in Stop Mode, motor stops
Binary encoded speed select, Bit 0, logical 1
Binary encoded speed select, Bit 0, logical 0
Binary encoded speed select, Bit 1, logical 1
Binary encoded speed select, Bit 1, logical 0
Binary encoded speed select, Bit 2, logical 1
Binary encoded speed select, Bit 2, logical 0
Binary encoded speed select, Bit 3, logical 1
Binary encoded speed select, Bit 3, logical 0
Inverter is in Run Mode, output to motor
runs at jog parameter frequency
Inverter is in Stop Mode
DC braking will be applied during decelera-
tion
DC braking will not be applied
The inverter uses 2nd motor parameters for
generating frequency output to motor
The inverter uses 1st (main) motor parame-
ters for generating frequency output to motor
Frequency output uses 2nd-stage accelera-
tion and deceleration values
Frequency output uses standard acceleration
and deceleration values
Causes output to turn off, allowing motor to
free run (coast) to stop
Output operates normally, so controlled
deceleration stops motor