Hitachi SJ100 Series Instruction Manual page 15

B–6
Parameter Settings for Keypad Entry
Fine Tuning Functions
"B" Group Parameters
Func. Code
B01 Selection of restart mode
B02 Allowable under-voltage power
failure time
B03 Delay before motor restart time
B12 Level of electronic thermal setting
B212 Level of electronic thermal setting,
2nd motor
B13 Electronic thermal characteristic
B213 Electronic thermal characteristic,
2nd motor
B21 Overload restriction operation mode
B22 Overload restriction setting
B23 Deceleration rate at overload restric-
tion
B31 Software lock mode selection
B32 Reactive current setting
B81 Analog frequency meter adjustment
B82 Start frequency adjustment
B83 Carrier frequency setting
B84 Initialization mode (parameters or
trip history)
B85 Country code for initialization
B86 Frequency scalar conversion factor
B87 STOP key enable
B88 Resume on FRS cancellation mode
B89 Data select for digital op. OPE-J
B90 Dynamic braking usage ratio
B91 Stop mode selection
B92 Cooling fan control
Name -FE (Europe)
Rated current
Rated current
Rated current
Rated current
Default Setting
-FU (USA)
00 00
1.0 1.0
1.0 1.0
Rated current
for each for each
inverter inverter
Rated current
for each for each
inverter inverter
01 01
01 01
01 01
Rated current
x 1.25 x 1.25
1.0 1.0
01 01
Rated current
x 0.58 x 0.58
80 80
0.5 0.5
5.0 5.0
00 00
01 02
1.0 1.0
00 00
00 00
01 01
0.0 0.0
00 00
00 00
User Setting