fantastic furniture HAVANA Table Nest Rectangle Assembly Instructions Manual page 8

Step 7
You will need
1 x Glue
4 x Cam Nuts
(H10)
(H3)
Flat head
screwdriver
This is how a cam nut works ........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
Squeeze Glue (H10) into the dowel holes in Long Aprons (P13).
Insert 4 x Cam Nuts (H4) into the holes of Long Aprons (P13) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P9, P11) and Legs (P10, P12) to Long Aprons (P13),
then tighten the cam nuts using a Flat head screwdriver.
Step 8
You will need
1 x Glue
2 x Cam Nuts
(H10)
(H3)
4 x Plastic Flat head
Glides (H11) screwdriver
Hammer
Squeeze Glue (H10) into dowel holes in Short Apron (P14).
Insert 2 x Cam Nuts (H3) into the holes of Short Apron (P14).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Short Apron (P14) to Legs (P9, P10),
then tighten the cam nuts using a Flat head screwdriver.
Hammer 4 x Plastic Glides (H11) into end of each leg.
www.fantasticfurniture.com.au
Make sure the side with the bigger
holes of the Long Aprons (P13)
is facing to the bottom of Legs.
H10
Make sure the side with the bigger
holes of the Short Apron (P14)
is facing up.
(P9)
H3
H3
(P13)
(P12)
H3
H3
(P13)
(P9)
H11
(P10)
H11
(P14)
(P10)
(P11)
H11
H3
(P12)
H3
H10
(P11)
PAGE 8
H11