fantastic furniture HAVANA Table Nest Rectangle Assembly Instructions Manual page 7

Step 5
You will need
2 x Half Round
2 x Cam Nuts
Nuts (H5)
(H3)
2 x Hexagonal 3 x Screws
Nuts (H6) (H9)
1 x Glue
1 x Spanner
(H10)
(H7)
Flat head
Phillips head
screwdriver
screwdriver
Squeeze Glue (H10) to dowels in Top Panel (P1).
Insert 2 x Cam Nuts (H3) into the holes of Legs (P4, P5).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach table leg fram to Top Panel (P1) with 2 x Half Round Nuts (H5)
and 2 x Hexagonal Nuts (H6) using Spanner (H7).
Tighten Cam nuts using a Flat head screwdriver.
Attach table leg frame to Top Panel (P1) with 3 x Screws using a Phillips head screwdriver.
Step 6
You will need
6 x Small
6 x Cam Bolts
Dowels (H8)
(H2)
1 x Glue Phillips head
(H10) screwdriver
Squeeze Glue (H10) into dowel holes in Legs (P9, P10, P11, P12) and insert 6 x Small Dowels (H8).
Screw 6 x Cam Bolts (H2) into place using a Phillips head screwdriver.
www.fantasticfurniture.com.au
(P5)
H9
H9
H3
H10
H8
H10
(P4)
H9
H3
(P1)
H8
H2
(P9)
H2
H8
H2
(P12)
H5
H6
H7
(P11)
H2
H8
(P10)
H2
H8
H8
H2
PAGE 7