fantastic furniture HAVANA Table Nest Rectangle Assembly Instructions Manual page 6

Step 3
You will need
1 x Glue
2 x Cam Nuts
(H10)
(H3)
Flat head
4 x Plastic
screwdriver
Glides (H11)
Hammer
Squeeze Glue (H10) into dowel holes in Long Apron (P6).
Insert 2 x Cam Nuts (H3) into the holes of Long Apron (P6)
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Long Apron (P6) to Legs (P4, P5), then tighten the cam nuts using a Flat head screwdriver.
Hammer 4 x Plastic Glides (H11) into end of each leg.
Step 4
You will need
8 x Dowels
2 x Cam Bolts
(H1)
(H2)
2 x Long Bolts 1 x Glue
(H4) (H10)
Phillips head
screwdriver
Squeeze Glue (H10) into dowel holes in Top Panel (P1) and insert 8 x Dowels (H1).
Screw 2 x Cam Bolts (H2) into Top Panel (P1) with a Phillips head screwdriver.
Insert 2 x Long Bolts (H4) into place as shown.
www.fantasticfurniture.com.au
H10
H11
H11
(P6)
(P5)
H10
H2
H1
H1
H11
(P4)
H3
Make sure the side with the bigger
H3
holes of the Long Apron (P6)
is facing up.
H2
H1
H1
H4
H1
H1
H11
H4
H1
H1
PAGE 6