Toro 4045 Installation Instructions Manual page 9

5
Installing the Cap and Decal
Parts needed for this procedure:
1 Monitor cap
1 Decal
Procedure
Gently lift the monitor away from the console using a
flat-head screwdriver in the gaps as shown in Box A of
21.
Figure 21
1. Gaps between the monitor and console panel
Insert the monitor cap into the port on the back of the
monitor and install the monitor back onto the console (Box
B of Figure 21).
Install the decal as shown in Figure 22.
1. Decal
Figure
9
Figure 22