Three Phase Manual Reversing Switches - InSinkErator SS-50 Installation, Care & Use Manual

DANGER
Electrical Shock
• Turn off all electrical supply to the disposer before attempt-
ing any work on it. Use a voltmeter or circuit tester to
ensure power is off.
• Installation must conform to all local electrical codes.
• All control centers and disposers must be carefully and
permanently grounded.
• A properly fused disconnect must be installed at the electri-
cal supply source for the control center.

THREE PHASE MANUAL REVERSING SWITCHES

Manual Three Phase Reversing Switch -
With Time Delay Relay
Wiring Diagrams
• Ensure that the control center voltage and phase match
the disposer motor and electrical supply. Check name-
plates on disposers and control centers for voltage and
phase specification.
• The disposer motor wiring connection is shown in the
disposer terminal box.
14
Property Damage
208 volts
Three Phase
12 Lead Motor
208 volts
Three Phase
Single Voltage
Motor Only
3 Lead Motor