Related Manuals for Messoa A101RZ
Summary of Contents for Messoa A101RZ
- Page 1 1MP/3MP/5MP True D/N Industrial Outdoor Network Bullet Camera Quick Guide A101RZ / A301RV / A301RZ / A501RZ V. 02.24...
-
Page 2: Table Of Contents
IR Bullet Series | Quick Guide Table of Content Product Overview Physical Characteristics Installation and Connection Package Content Installation 2.2.1 Checking Appearance 2.2.2 Mounting the camera 2.2.3 Connecting the Wires 2.2.4 Adjusting the Camera Position 2.2.5 Adjusting Zoom & Focus / PIN Interface 2.2.6 Adjusting the Sun shield hood Connection... - Page 3 IR Bullet Series | Quick Guide WARNING This unit operates at AC 24V/ PoE (IEEE 802.3af Class 0). Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty. ...
- Page 4 IR Bullet Series | Quick Guide FCC Compliance Statement Information to the user: This unit has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 5: Product Overview
IR Bullet Series | Quick Guide 1 Product Overview 1.1 Physical Characteristics Unit: ㎜ A301RV A101RZ / A301RZ / A501RZ Figure 1 - 1: Physical dimension & Pictorial Index... - Page 6 PIN including “RESET”, “DEFAULT”, “VIDEO” and “Micro Internal PIN Cap SD Card Slot” will be shown. More details are described below. (Micro SD Card Slot is for A101RZ/A301RZ/A501RZ Exclusive.) Table 1 - 2: I/O Connector Definitions Purple (Signal) Au/I: Audio in...
-
Page 7: Installation And Connection
IR Bullet Series | Quick Guide 2 Installation and Connection Package Content Check everything in the packing box matches to the order form and the packing slip. In addition to this manual, items below are included in the packing box. ... -
Page 8: Mounting The Camera
IR Bullet Series | Quick Guide 2.2.2 Mounting the camera Step 1. Mark Mounting Area Use the mounting template to mark out and prepare a mounting area. Place the supplied mounting template on a mounting surface. Drill 6 mm (0.2”) outer holes x 6 at the mounting surface corresponding to the 6 indicated positions for plastic anchors (supplied). - Page 9 Safety-cord screw of the unit A301RV Safety wire (fall prevention wire, not supplied) Safety-cord screw of the unit A101RZ / A301RZ / A501RZ Figure 2 - 3: Mounting the Camera Warning Depending on the material of mounting surface, different screws and anchors than those supplied may be required.
-
Page 10: Connecting The Wires
IR Bullet Series | Quick Guide 2.2.3 Connecting the Wires 1. While mounting the unit, pass the intact pigtail cable through the mounting bracket and also pass it through the hole of mounting surface or place it by the side hole of the mounting bracket as the following figures shown depending on your different applications. -
Page 11: Adjusting The Camera Position
IR Bullet Series | Quick Guide 2.2.4 Adjusting the Camera Position Pan Adjustment (A) Loosening the cross screw by a cross screwdriver on the retaining ring (A position) can allow you to pan the unit horizontally to your desired field of coverage. ... - Page 12 RESET button to reboot the unit. And the VIDEO interface is for video output via cable connecting. Also, Micro SD slot is for inserting micro SDHC/SDXC card for file storage (A101RZ/A301RZ/A501RZ Series Exclusive). A301RV...
-
Page 13: Adjusting The Sun Shield Hood
IR Bullet Series | Quick Guide Please make sure to fasten the cap to prevent unit from water leaking issues. Caution After zoom/focus ajustments, please tighten the screws to avoid water leaking issues. 2.2.6 Adjusting the Sun shield hood The unit is designed for outdoor application and thus possibly subject to influences of sunlight or rain. Sun shield hood is consequently mounted for preventing the unit from those effects. -
Page 14: Connection
IR Bullet Series | Quick Guide 3 Connection Network Topology The unit, which is equipped with Ethernet RJ-45 network interface, can deliver video images and audio in real time via either Internet or Intranet. Please refer to the skeleton drawings shown below for understanding. Figure 3 - 1: Network Topology System Requirements Below table lists the minimum requirement to implement and operate the unit. -
Page 15: Connecting Process
IR Bullet Series | Quick Guide Connecting Process 3.3.1 Default IP address Since this is a network-based unit, an IP address must be assigned at the very first. The unit’s default IP address is 192.168.0.30 and sub mask is 255.255.255.0. However, if you have a DHCP server in your network, the unit would obtain an IP address automatically from the DHCP server so that you don’t need to change the camera’s IP address. - Page 16 IR Bullet Series | Quick Guide Viewing Preparation Images of the unit can be viewed through various browsers. Before viewing, follow these steps to enable the display. Enable Cookies as instructions below In Internet Explorer, click Internet Options on the Tools menu. ...
- Page 17 IR Bullet Series | Quick Guide Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows: 【Download signed ActiveX controls】 Prompt (recommended) 【Download unsigned ActiveX controls】 Prompt 【Initialize and script ActiveX not marked as safe for scripting】 Prompt Figure 3 - 4: Security Settings 2/4 【Automatic prompting for ActiveX controls】...
- Page 18 IR Bullet Series | Quick Guide 【Run ActiveX controls and plug-ins】 Enable 【Script ActiveX controls marked safe for scripting*】 Enable Figure 3 - 6: Security Settings 4/4 Press OK to save the settings. Close all your browser windows and restart a new window. This will allow the new settings taking effect.
-
Page 19: Ip Finder
IR Bullet Series | Quick Guide IP Finder IP Finder is a utility program that helps users to locate the unit in local area network that computer is connected to. Please note that IP Finder works only in Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7 or above.
Need help?
Do you have a question about the A101RZ and is the answer not in the manual?
Questions and answers