Installation - Graco 255963 Instructions And Parts

Installation

Hopper mounting kit 256259 allows the hoppers (D) to
mount on the sides or back of the frame (A).
1. Mount hoppers (D) on sides of the frame (A). See
F . 3.
IG
a. Attach main bracket (101) to frame (A) with
screws (107).
F . 3: Sides of Frame
IG
b. Repeat for second hopper (D) on opposite side
of frame (A).
2. Mount hoppers (D) on back of the frame (A). See
F . 4.
IG
a. Attach the corner bracket (103) to frame (A) with
screws (108) and washers (110).
b. Attach lower mount bracket (104) to frame (A)
with screws (108) and washers (110).
c. Attach main bracket (101) to frame (A) with
screws (107).
d. Repeat steps b and c for second hopper (D).
312747C
A
101
107
A
108
110
110
104
108
F . 4: Back of Frame
IG
3. Connect reducing swivel (211) to fluid outlet assem-
bly (F) if your system uses a 50:1 pump. Connect
reducer bushing fitting (212) and swivel fitting (215)
to fluid outlet assembly (F) if your system uses a
70:1 pump.
NOTICE
Do not use pipe sealant on swivel end of swivel fit-
tings.
211
F . 5: Connect Fluid Outlet Assembly to Lower
IG
4. Loosen union (208).
Installation
103
101
107
215
F
212
208
9