Graco 255963 Instructions And Parts page 12

Installation
9. Open junction box door and route power cable (303)
up through cord grip.
BA
BB
303
F . 13: Immersion Heater Power Cables
IG
NOTE:
Press the top lever down on the power switch body (BA,
BB) and pull away from the junction box. Install by push-
ing the power switch body into the junction box until a
snap is heard.
10. Loosen lugs 2 and 4 on immersion heater A power
switch (BA) or immersion heater B power switch
(BB). Insert power leads and tighten lugs.
11. Connect green wire to 102GND grounding lug.
Feed Pump and Agitator Kits
See manual 312769 for installation and operation
instructions.
12 312747C