Troubleshooting - Graco 255963 Instructions And Parts

Troubleshooting

Troubleshooting
Problem
Lid does not properly seal on hopper. Material build up.
Material leaking between cover and
hopper.
Algae in water.
18
Cause
Damaged gasket.
Gasket is not sealed properly.
Ethylene glycol was not added to
water.
Solution
Remove built up material from gas-
ket. Replace as necessary.
Check for built up material on gasket.
Replace as necessary.
Drain fluid. Add 50/50 water and eth-
ylene glycol mixture in outer cavity
312747C